15
Safety / Identification of hints in the operating instructions
1. Safety
Extracted from VDMA-Standard sheet 24292 (VDMA = Verband Deutscher Maschi-
nen- und Anlagenbau e.V.). These operating instructions contain basic information
on installation, operating, and maintenance, and should be followed carefully. For
this reason it is essential that these instructions are carefully read before installati-
on or commissioning. The operating instructions should always be readily available
at the location of the unit.
In addition to following the safety regulations, it is also essential that the special
safety instructions given under other headings be observed.
1.1 Identification of hints in the operating instructions
Safety instructions given in this operating manual, the non-observance of which
could cause danger to life have been specifically high-lighted with the general
danger symbol. (See DIN 4844-W 9).
The presence of a dangerous voltage is identified with
the safety symbol. (See DIN 4844-W 8).
Symbols directly on the unit itself, e.g.
> Name plate
must be carefully observed and must be maintained in a legible condition.
GC-P-FLOW-F-12-1101-JH1.indd 15 24.01.12 09:52
To Next Page
Loading...
