Need help?Do you have a question about the Conergy IPG 5000 vision and is the answer not in the manual?
Details the primary function of Conergy IPG string inverters in converting DC to AC power for the grid.
Defines the specific purpose of Conergy IPG Series inverters for DC to AC conversion in solar systems.
Details essential safety rules for working with electrical installations and the inverter.
Explains the structure and meaning of warning signs (Danger, Warning, Caution) used in the manual.
Details requirements for the installation site, including weight, temperature, and IP rating.
Specifies required clearance distances and air circulation guidelines for safe inverter installation.
Provides step-by-step instructions and precautions for mounting the inverter on a wall.
Lists fundamental safety rules to be observed before starting electrical installation work.
Details the various external connections on the inverter, including CAN, AC Out, CTRL, and DC.
Explains how to connect the AC mains cable to the inverter's output socket.
Guides on using MC4 connector plugs/sockets for connecting the solar power system to the inverter.
Outlines the steps required to start up and operate the installed inverter.
Explains how fault messages appear on the inverter's display and how to rectify common issues.
General| Rated Output Power | 5000 W |
|---|---|
| Nominal AC Power | 5000 W |
| Nominal AC Voltage | 230 V |
| Dimensions | 468 mm x 348 mm x 175 mm |
| Weight | 17 kg |
| Protection Class | IP65 |
| Power Factor | > 0.99 |
| Operating Temperature Range | -25 °C to +60 °C |
| Cooling Type | Natural convection |
| Output Frequency | 50 Hz / 60 Hz |
To Next Page
