Need help?Do you have a question about the Conergy IPG Series and is the answer not in the manual?
Specifies that inverters are for converting DC from solar modules to AC and must be installed in acceptable environmental conditions.
Outlines the owner's duty to ensure safe operation and the electrician's need to understand the manual.
Provides essential safety rules for working with the device, emphasizing qualified personnel and precautions.
Details the structure of warning signs (symbol, indicator word, description) and risk levels (DANGER, WARNING, CAUTION).
Details requirements for weight bearing, temperature resistance, and ambient conditions for installation sites.
Describes the process of wall mounting the inverter, including necessary tools and safety considerations.
Reinforces critical safety rules for electrical installations, including disconnection, earthing, and presence of a second person.
Explains the external connections available on the inverter for CAN, AC output, CTRL, and DC inputs.
Guides on how to connect the AC mains cable to the inverter's AC out socket, including cable specifications and tightening torque.
Guides on the final steps to safely commission the inverter after installation and connection, including power-up procedures.
Explains the meaning of different LED states (Ready, Solar Generator, Grid, Fault) and their indications of status or faults.
Describes fault messages appearing on the Vision series inverter's display and provides possible causes and remedies.
General| Operating Temperature Range | -25°C to +60°C |
|---|---|
| Cooling | Natural convection |
| Protection Degree | IP65 |
| AC voltage | 230V |
| Nominal AC Voltage | 230V |
| AC Frequency | 50 Hz / 60 Hz |
To Next Page
