Confer Plastics EVOLUTION 7100

To Next Page

MODEL #7100

“EVOLUTION” A-FRAME LADDER

FOR RIGID-FRAMED POOLS ONLY

ASSEMBLY AND INSTALLATION MANUAL

Made in U.S.A. by

SAVE THESE INSTRUCTIONS

DEALER/INSTALLER: GIVE TO HOMEOWNER

The Anti-Entrapment Barrier is included in this ladder for the U.S. and Canada only, as required by ANSI/APSP requirements.

The Anti-Entrapment Barrier is NOT intended as a substitute for competent adult supervision.

If you would like to purchase the barrier, please visit our website at: www.conferladders.com

Need help?

Do you have a question about the Confer Plastics EVOLUTION 7100 and is the answer not in the manual?

Summary

Confer Evolution A-Frame Ladder Manual

Product Identification

Identifies Model #7100 Evolution A-Frame Ladder for rigid-framed pools.

Ladder Assembly Instructions

Parts, Tools, and Initial Assembly

Lists parts and tools, and details initial assembly steps 1-5.

Intermediate Assembly Steps

Covers assembly steps 6-13, focusing on leg and platform attachment.

Final Assembly and Barrier Setup

Details steps 14-22, including final assembly, barrier, and tread connector installation.

Ladder Usage and Maintenance

Preventing Float and Winterizing

Instructions on filling legs with water to prevent floating and winterizing procedures.

Optional Kits and Accessories

Information on optional conversion kits and accessories like the Skim-It.

Safety, Warranty, and Support

Essential Safety Guidelines

Outlines critical safety rules for ladder placement, usage, and assembly precautions.

Warranty and Contact Information

Details the limited pro-rated warranty and provides manufacturer contact information.