Need help?Do you have a question about the Confer Plastics ROLL-GUARD 7200 and is the answer not in the manual?
Catalog of all components included for ladder assembly.
Listing of necessary hardware and tools for the assembly process.
Guidance and tips for a successful and efficient assembly.
Instructions for correctly installing treads onto the inside rails, noting track clearance.
Caution against installing the bottom tread prematurely in Step 1.
Guidance on fitting treads to the outside rails, ensuring track is not obstructed.
Completion of the outside ladder section, including bottom tread placement.
Procedure for attaching handrails to the deck and then to the ladder sections.
Installing ladder bridges and final deck securing with screws.
Instructions for sliding the roll-guard into the ladder tracks.
Crucial step for installing the bottom tread to block the track for the roll-guard.
Process of filling ladder rails with water to help the ladder sink.
Attaching the ladder to the pool's top seat using braces and hardware.
How to operate, lock, and secure the roll-guard for safety.
Essential rules for safe ladder placement, usage, and weight limits.
Critical safety advice including checking parts and proper assembly sequence.
Instructions for routine cleaning and preparing the ladder for off-season storage.
Details on the limited pro-rated warranty for the swimming pool ladder.
General| Category | Ladders |
|---|---|
| Model | ROLL-GUARD 7200 |
| Material | Plastic |
| Weight Capacity | 300 lbs |
| Height | 72 inches |
| Features | Roll-Guard |
To Next Page
