CONFLOW UNIWORLD Series - Page 31

UNIWORLD Series M/UNIWORLD-M/E ed. 01 2020
WWW.CONFLOW.IT Page 30
Red LED
Green LED
Fixed on
Fast flashing
Slow flashing
Off
Fixed on
Fast flashing
Slow flashing
Off
Actuator errors
Possible causes
Possible solutions
X
X
The actuator has reached the end
of its life
Wear or operating
conditions
Contact PS service team
X
X
Electronic errors or invalid
parameters
1) Power supply cut during
commissioning
2) Electrical component
defects
1) Relaunch the parameters (->
see AMS-PSCS manual), then
repeat commissioning
2) Contact PS service
team
X
X
Critical or maximum temperatures
reached
1) Number starts too high
2) Ambient temperature too
high
1) Check application
settings
2) Check ambient
temperature and try to reduce
it -> see relevant information
pages
X
X
Wrong mechanics on actuator
Mechanical component
faults
Contact PS service team