42 | CONGA 9090 AI
ENGELSK
9. Make sure the robot is not in Sleep mode, it will not resume cleaning
under this mode. It won’t resume cleaning when it is placed manually
on the charging base.
10. Make sure the robot is successfully connected to the network and al-
ways in the range covered by the Wi-Fi signal.
11. Make sure the robot and the charging base are in an area with good
Wi-Fi signal, reset the router and try connecting them again.
12.1 Make sure that the areas to be cleaned are properly illuminated.
12.2 Clean the lens with a soft, clean cloth and make sure that the sensor is
not blocked. Avoid using detergents or sprays during clean-ups.
9. TECHNICAL SPECIFICATIONS
Model: Conga 9090 AI
Product reference: 5416
100-240 V ~ 50/60 Hz
Battery: 14.8 V, 6400 mAh
Frequency bands: 2.412-2.472 GHz
5.150-5.250 5.250-5.350 GHz 5.470-5.725 GHz
Maximum Transmission Power: 16 dBm
Made in China | Designed in Spain
10. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Elec-
tronic Equipment (WEEE), species that old household electrical
appliances must not be disposed of with the normal unsorted mu-
nicipal waste. Old appliances must be collected separately, in order
to optimize the recovery and recycling of the materials they contain, and
reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation to dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
To Next Page
Loading...
