CTUPO02
Infodapter Interface
for Porsche Vehicles
APPLICATION
FEATURES
Porsche Panamera 2009 - 2016
Porsche Macan (95B) 2014 - 2016
Porsche Cayenne 2011 - 2016
• Retains Steering Wheel Control Functionality
• Retains Phone Button Functionality
• Retains MOST 25 Fiber Amplied System
• Retains USB and AUX Inputs
• Retains Reversing Camera
• Retains Parking Sensor Audio and OEM Parking Sensor Graphics
• Provides Outputs for Park Brake, Reverse Gear, Speed Pulse, Mute & Amp Remote
• Updateable via USB (contact supplier for more information)
The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This
instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the
vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.
Note: Application data is subject to change at any time
DISCLAIMER
For ber-amplied vehicles with MOST 25 systems and quadlock connectors.
CTUPO02_IG_en-GB_v1
i. Interface Box
ii. ISO Connector (16 Pin)
iii. Quadlock Connector (40 Pin)
iv. RCA Amplier (Red/White)
v. RCA AUX (Red/White)
i
ii
iiiiv
vi
v
vii
viii
vi. RCA Camera (Yellow)
vii. Flying Wires
viii. USB Retention Harness
ix. Amp Retention Interface
ix
To Next Page
Need help?
General