14
Memory Options
The camera is also equipped with an expandable media card slot
capable of accepting up to 32GB SD card with Class 6 or below
speed rating (sold separately). The LCD display will show the
number of images stored on the SD card. If no SD card is
inserted the front counter display will show “NOSd”.
Inserting SD memory card
NOTE: Make sure camera is in the OFF position
whenever adding or removing memory.
• Insert SD memory card in to the SD card slot completely
and in the correct direction as shown by the sticker
located at the side of the housing.
• To remove the SD memory card, depress the SD card and
pull out the card gently.
• SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please
make sure to format the SD card in your computer prior
to use in your camera. New cards are good to use straight
from the package.
FORMAT – Definition : When you format a SD memory card, the
operating system erases all information and files on the card.
Then it creates an internal address tables that it later uses to
locate information and files. Formatting also removes all Hidden
System files as well. Basically it cleans your SD memory card just
like if it was brand new.
DO NOT USE File System type: “NTFS” or “exFAT”, these formats
are not supported.
To Next Page
Loading...