13
Battery and Memory Installation
WARNING : Do not use different Voltage lead acid
battery other than the one specified in this section.
Doing so will damage the camera and will void the
warranty.
WARNING : ALWAYS have the camera in the OFF position
when installing or removing batteries and memory card.
Removing batteries or memory card while the camera is
ON may damage the camera.
Your
HUNTING CAMERA
is designed to operate using two different
types of battery power options.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell batteries.
Be sure to use high quality brand name alkaline batteries. Install
batteries with correct polarity (+/-) as noted inside the battery
compartment.
DC 6V external power
The camera is equipped with an external power jack designed to
accept a barrel plug cable of DC 6V adaptor (Sold separately).
• Make sure camera is in the OFF position.
• Insert the external AC to DC power adaptor barrel plug
into the DC 6V jack on the bottom of camera housing.
• Turn the switch to a CAM or PSET.
To Next Page
Loading...