31
• Plug the smaller end of USB cable into the camera’s side
panel.
• The camera will automatically power ON and display the
word USb on the LCD display.
• At the same time, your computer will recognize the
camera as a Removable Storage device. You will find it
under MY COMPUTER.
• At this point you have several options:
To view your images or play your videos: Click on the
Removable Storage device and then drill down to the
file you want to see and double click on the file name.
To save your images and videos: Highlight the file or
files you want to save and drag them to your hard drive.
To delete your images and videos: Highlight the files or
files you want to delete and press the [DELETE] button.
To erase all files and reformat you SD memory card:
Right click on the Removable Storage device under My
Computer and select FORMAT then click START. You will
receive a Warning message press [OK]. Then CLOSE to
exit.
NOTE: Make sure before you FORMAT you are certain
it is the Removable Storage device for the camera.
• Once you’re done, simply unplug the cable from both
your computer and the camera. The camera will turn OFF
automatically.
To Next Page
Loading...