33
NOTE: All videos are recorded with audio but only
have sound when viewing playback on a PC.
TV Out System Settings:
• Press the [M] button once.
• The word “ tu ” on the camera’s internal screen will be
blinking.
• Press the [OK] once and now you’ll see “ tu – n “ blinking.
• Press the [DN] button to set the camera’s TV OUT to PAL.
• The word “ tu – P ” will now be blinking.
• Press the [OK] to confirm this setting.
• The word “ tu - P “ will be blinking and then stops.
• Once the blinking stops, power off the camera. Wait for 5
seconds and then power up your camera again.
Deleting files in the field
• Slide the switch the CAM position.
• LCD screen will display the camera status screen.
• Press the [M] button within 30 seconds to enter the
programming mode.
• Press the [DN] button until you see the word - dEL - in
blinking on LCD display.
• Press [OK] button to enter the DELETE & FORMAT menu.
• Press [UP] or [DN] button to select the desired function.
NO-dL (No Delete) - No images get deleted.
d-ONE (Delete One) - Only the last file will get deleted.
To Next Page
Loading...