TO
REGULATE THE LENGTH OF STITCH
Most sewing will
be
done with the maximum stitch length. However, the length
of
the stitch can
be adjusted
as
follows:
(1)
Loosen the thumb nut on the stitch length
lever.
(2)
Raise the stitch length (feed regulator) lever until the desired stitch length
is
obtained.
(3)
Tighten the thumb nut.
REVERSE SEWING
To
sew
in
reverse:
1
0
Forward Feed
Reverse Feed
(1)
Lower the feed regulator (stitch length) lever all the
way
to
the bottom
of
the slot
in
the
stitch
length plate.
(2)
Hold the lever there until reverse sewing is completed.
(3)
Then return the lever to the forward position.
-6-
To Next Page
Loading...
