Consort C6010 - Language; Outputs; Contrast; Date and Time

C6010 • C6020 • C6030
C6010 • C6020 • C6030
C6010 • C6020 • C6030 C6010 • C6020 • C6030
2
Outputs
An insulated standard USB port is provided for interfacing the instrument with a
computer.
Contrast
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [SYSTEM] and press
OK
.
4.
Select [CONTRAST] and press
OK
.
5.
Adjust the con trast and press
OK
.
Language
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [SYSTEM] and press
OK
.
4.
Select [LANGUAGE] and press
OK
.
5.
Select the desired language and press
OK
.
Password
Password
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [SYSTEM] and press
OK
.
4.
Select [PASSWORD] and press
OK
.
5.
A private code can be pro grammed to avoid unde sired access to the instru-
ment. Select [YES] and press
OK
to enter your secret sequence of 5 keys.
Date and time
Date and time
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [SYSTEM] and press
OK
.
4.
Select [DATE/TIME] and press
OK
.
5.
Select [MODIFY] and press
OK
.
6.
Adjust date and time and press
OK
.
Power management
1.
Press
MODE
.
2.
Select [MENU] and press
OK
.
3.
Select [SYSTEM] and press
OK
.
4.
Select [POWER MANAGEMENT] and press
OK
.
5.
Select [POWER OFF] (batteiesy or DC power) and press
OK
.
6.
Adjust the time to shut down and press
OK.
7.
Select [BACKLIGHT] (only in case of DC power) and press
OK
.
8.
Select [YES] or [NO] and press
OK.
Inputs
The measuring electrode should be connected to the coaxial INPUT connector. If
separate electrodes are used, connect the reference electrode to the REF. ter-
minal. Automatic temperature compensation and temperature measurements are
possible by plugging a Pt1000 temperature probe into the °C terminals. You can
also use a combination pH electrode with built-in Pt1000. Its banana plugs should
be inserted in the °C terminals. Without Pt1000, the manual temperature compen-
sation is automatically switched on.