© Constructor 2020 9
All material handling equipment must be inspected regularly and according to DS-EN 15635.
• Visual inspection:
quote DS-EN15635
“The person responsable for warehouse safety must see to it that
regular inspections are carried out weekly, or with other regular
intervals based on a risk assessment. Each inspection must be
documented in writing, and all reports must be led.”
• Expert inspection:
quote DS-EN 15635
“An expert must carry out an inspection at least every 12th month.
A written report must be handed over to the person responsable for
the warehouse safety, including observations and proposals for any
potential improvements.”
• Safety review: A safety review must always be carried out in connection with a
change in load levels or other reconstruction. This is to secure that the
data from the load signs are still valid.
If you have any questions, please contact your local representative. Buyer or user is responsible
for above inspections to be carried out. When repairing pallet racking, damaged supporting parts must
be replaced.
Inspecting the racking
To Next Page
Loading...