User Manual
19
placed well. Stop printing and print date again after collecting the wave.
When the leads state is "DROP", leads shown on the screen have been off .Please reconnect
them.
(4) Print operation
Press under this state, you can start print system setup and ECG wave, press
again the device will be turned off.
Attention: when the paper cabinet is empty, press or , the device will
indicate no paper, please put in the paper then press .
(5) Mark operation
Press you can print a lmv standard voltage marker, which is helpful to know current
sensitivity.
Attention: the marking procedure is automatically, after this procedure you need not
press any key, the interface will be back automatically.
(6) Operation of waveform frozen
Press you can freeze current waveform in LCD screen, which is helpful for preview.
Press again, back to previous interface.
(7)Operation of turning off
Press for several seconds, the device will be turned off.
13.3 System menu
English version
Chinese version
(1) Operation of menu
To Next Page
Loading...
Need help?
General
