Contixo F19 - Page 10

4. Lithium Baery Charging Instrucons
a. Charging: Insert the USB cable into the USB port of the charger and connect
to the charging port of the baery to charge.
The LED lights on when charging and red light turn off when full charging
completes.
b. The drone can be charged by a travel or car charger.
c. The drone baery takes about 60-80 minutes for a full charge. Flight me
is about 10 minutes depending on how the drone is being used.
- 8 -
Align the protecve frame with the arm and install it (Figure 1), press it unl
it is in place, and then press the posion (Figure 2) up to fasten the protecve
frame.
5. Assembling protecve guard