Contixo TD2 - Packing Details; Troubleshooting Guide; Common Drone Issues and Solutions

- 16 -
BATTERY
Drone x 1Remote Control x 1
PACKING DETAILS
Charging cable x 1
Propellers x 4 Batteries x 2
User Manual x 1



TROUBLE SHOOTING
Drone does not respond
to user controls.
The blades spin, but the
drone cannot take off.
The drone shakes
heavily.
Drone does not stabilize
during flight with fine tuning.
1. The blades distorted.
2. Defective motor.
The blades distorted. Replace the blades.
1. Replace the blades.
2. Replace the motor.
1. Remote is not synced to
the drone.
2. Insufficient battery power.
1. Refer to page 1-2 (Flight).
2. Recharge the battery.
1. Recharge the battery.
2. Replace the blades.
Problem Cause Solu�on
1. Insufficient battery power.
2. The blades distorted.
3. The blades Side A and Side
B are reversed.
Drone cannot takeoff after
accident.
Four-axis acceleration sensor
loses balance.
Recalibrate compass.