EasyManuals Logo

Contour CoreBelt User Manual

Contour CoreBelt
21 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
38
CAUTIONS WITH GEL PAD ELECTRODES
Use only electrodes supplied by Contour Technology. Other electrodes may
present a risk of unsuitable electrical characteristics with the stimulator.
The current densities for any electrode exceeding 2 mA/cm^2 may require
special attention of the user.
Electrodes should not be shared with other persons. Each user must have his/her
own electrode set, as skin reaction or cross contamination may occur.
Do not immerse the electrodes into water.
Do not apply a solvent of any kind onto the electrodes.
Always stop the Contour Technology Muscle Stimulator before removing or
moving the electrodes.
Wash skin and dry skin thoroughly before applying the electrodes.
Apply the whole surface of the electrodes rmly to the skin. Do not use
electrodes that do not stick or only partially stick to the skin.
In case of skin redness under the electrodes after a session, do not start a new
session if skin redness is still evident.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Contour CoreBelt and is the answer not in the manual?

Contour CoreBelt Specifications

General IconGeneral
BrandContour
ModelCoreBelt
CategoryFitness Equipment
LanguageEnglish