EasyManuals Logo

Contour CoreBelt User Manual

Contour CoreBelt
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
8
To begin your session, place the Contour CoreBelt
over your midsection
withthegel(BLACK)sideoftheGelPadelectrodestuckdirectlyonyour
skin. The yellow center line, on the inside of the CoreBelt, should be directly
over your belly button and the outside pads positioned in between your ribs
and hip bones. Depending on the style of your belt closure, you’ll either click
the ends of the belt together and pull on the end to snug it tight or pull the
belt tight and press down on the hook and loop to secure. The belt should fit
snugly but not be uncomfortable.
Putting on the Contour CoreBelt
Belt-clip closure Hook & Loop closure
++
--
Navigating the display screen
Use the "+"/"-" toggle to navigate up or down on the screen.
Scrolling through the features and programs on the screen is achieved by
pressing down on the toggles.
9
Operating instructions
SELECT TRAINING AREA
5
With the Contour CoreBelt
you will use the “Upper
Body” program. This is already highlighted so simply
push the Select button to advance to the next screen.
TURN UP THE INTENSITY
6
TURN ON THE CONTOUR M2 DEVICE
1
Pushthe“On/Off”button.Alogoscreenwillappear
followed by a warning screen. We recommend you read
the warning screen and refer to the warning chapter in
this manual if you have any concerns.
SELECT RECENT PROGRAM
2
Afterafewsecondsthescreenwillaskyou“would
you like to use the most recent program?” Use either
+”/“-” toggle to highlight your choice, then push the
Select button to activate.
SELECT NEW PROGRAM
3
We recommend starting with the “Resistance” program.
This is already highlighted so simply push the Select
button to advance to the next screen.
SELECT WORKOUT LEVEL
4
We recommend starting at “Level 1”.
This is already highlighted so simply push the Select
button to advance to the next screen.
(Asyougetstrongerandrmeryouwillwant
to increase the workout level accordingly.)
When the program starts, the Intensity Levels will be
at “0” and blinking. Using the “+” end of the toggles,
increase the intensity to your maximum comfort level.
The left toggle controls the left side of your body and
the right toggle controls the right side of your body.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Contour CoreBelt and is the answer not in the manual?

Contour CoreBelt Specifications

General IconGeneral
BrandContour
ModelCoreBelt
CategoryFitness Equipment
LanguageEnglish