Contour NEXT ONE - Setting Meter Time and Date; Set the Time

ÂÂÉÏøÅÂÉÅÄʾ»ɹȻ»Ä·Äºʾ»;¿Ê»ÉÊÈ¿ÆÆÅÈÊ¸È¿»ŲÏ¿½¾ÊËÆƔ
It is very important to verify that 8.8.8 displays fully and that the
white light from the test strip port is visible.
If there are missing characters or if the strip port light is a color
Åʾ»Èʾ·Ä;¿Ê»Ƒ¹ÅÄÊ·¹ÊËÉÊÅûÈ»ÈÌ¿¹»Ɣ¾¿É÷Ï·Ů»¹Êʾ»
way you see your results. See Contact Information.
ʸ¿»Í̻ȷÂÂ·È½»Ê·Ä½»
Initial setup begins with a view of the Overall Target Range.
The meter displays a pre-set
Overall Target Range. You can
change this pre-set Target Range
from the CONTOUR DIABETES app
after initial setup.
To move to the next screen,
press OK.
Continue to Set the Time.
2 Set the Time
The hour is blinking.
1. To change the hour, press the
or button on the outer ring.
Outer Ring
14