Get the Blood Drop: Fingertip Testing
1. È»ÉÉʾ»Â·Ä¹¿Ä½º»Ì¿¹»ŰÈÃÂÏ
against the puncture site and
press the release button.
2. Immediately touch the tip of the
test strip to the drop of blood.
The blood is drawn into the test
strip through the tip.
CAUTION: Do not press the
tip of the test strip against the
skin or place the blood on top
of the test strip. These actions
could lead to inaccurate
results or errors.
3. Hold the tip of the test strip in
the blood drop until the meter
beeps.
NOTE: If the Meal Marker feature
is On, do not remove the test strip
until you select a Meal Marker.
WARNING
• Always wash your hands with soap and water and dry
them well before and after testing or handling the meter,
lancing device, or test strips.
• If your meter is being operated by a second person who is
providing testing assistance to you, the meter and lancing
device should be disinfected prior to use by the second
person.
21