Contour NEXT ONE - Configure Target Lights (smartLIGHT)

Set Target Lights
(smartLIGHT target range indicator)
Your meter comes with the Target Light setting turned On.
When this feature is On, the test strip port on your meter displays
a Target Light in a color that corresponds to your test result.
Green means
Red means
Yellow means
In Target
Below Target
Above Target
If you are not on the Target Lights screen:
1. From the Home screen, select
the Settings symbol and
press OK to enter Settings.
2. Continue to press OK until you see the Target Lights screen.
or
·È½»Ê¿½¾ÊÏøÅÂƓ
3. To turn Target Lights On or Ů, press the or button to
display the option you want.
4. Press OK.
The meter displays the Bluetooth screen.
38