© 2016 Hangzhou ContrasTech
Hangzhou ContrasTech reserves the right to make changes to this information without
notice. Reproduction of this manual in whole or in part, by any means, is prohibited
without prior permission having been obtained from Hangzhou ContrasTech.
About
This Manual is a basic description of Mars Line Scan GigE Industrial Camera, which
mainly includes the product description, quick installation guide and Simple
introduction of SDK(iCentral). This manual may be updated because of the product
upgrading or other reasons. Our sales or engineers will send you the latest manual if
your need.
Notice
We can not and do not take the responsibility for the damage caused to you or to
any other equipment connected to our camera.
Handle this camera with care. Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper handling.
Do not open the housing and do not touch the internal components,you may
Do not use strong or abrasive solvents(as alcohol, benzine or thinner) when
cleaning the cameras. Use instead a soft, lint free cloth lightly moistened with a
mild detergent solution.
Do not expose the camera to rain or moisture, or try to operate it in wet area. This
camera is designed for indoor use.
Please keep the camera closed or mount a lens on it to avoid the sensor from
Avoid clean the surface of the camera’s sensor if possible. If must, use a lens
tissue or a cotton tipped applicator an ethanol.
This manual is applicable to the following models.
To Next Page
Loading...