The following table describes these parameters.
Provides the number of bytes
transferred for each image or
chunk on the stream channel.
This includes any end-of-line,
end-of-frame statistics or other
stamp data. This is the total size
of data payload for a data block.
Indicates the current number of
active logical links.
Selects which logical link to
control.
MAC address of the logical link.
GEVCurrent IPConfigurationLLA
GEVCurrentIPConfigurationLLA
Controls whether the Link Local
Address IP configuration
scheme is activated on the given
logical link.
GevCurrentIPConfigurationDHC
P
GevCurrentIPConfigurationDHC
P
Controls whether the DHCP IP
configuration scheme is
activated on the given logical
link.
To Next Page
Loading...