Need help?Do you have a question about the Contrec 202D and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Operating Temperature Range | -20°C to +60°C |
| Output Signal | 4-20 mA |
| Enclosure Rating | IP65 |
| Inputs | Analog, Pulse |
| Outputs | Analog, Pulse, Relay |
| Accuracy | ±0.1% |
Details the IECEx, ATEX, and CSA certifications for hazardous area use.
Explains the formula for calculating flow rate (R = f x H / S) and defines terms.
Lists and describes the various CAL steps (0-18) used for programming parameters like pulse output, scaling, and alarms.
Describes the features and operation of the battery-powered model without external power sources.
Details connection requirements for Intrinsically Safe (IS) coils or sensors used with the device.
Explains that devices like reed switches classified as "simple apparatus" can be connected without certification.
Provides connection guidelines and maximum input parameters for certified Namur proximity switches.
Outlines safety parameters for connecting the 4-20mA analog output to certified devices via a barrier.
Describes connecting low/high alarm or pulse outputs to certified devices, emphasizing independent IS circuits and barriers.
Outlines specific conditions for ATEX/IECEx certification, including mounting requirements for electrostatic safety.
To Next Page
