Need help?Do you have a question about the Contrel EMA90 and is the answer not in the manual?
General| Mounting | DIN Rail |
|---|---|
| Frequency | 50/60 Hz |
| Display type | LCD |
| Dimensions | 72 x 90 x 70 mm |
| Protection | IP20 |
| Frequency Range | 45-65 Hz |
| Input current | 5A |
| Communication interface | RS485 |
Explains the sampling method and accuracy for electrical measurements.
Outlines critical safety precautions before and during instrument installation.
Emphasizes safety for personnel during installation and operation.
Details how to correctly connect the instrument to a power source.
Instructions for connecting voltage measurement inputs.
Instructions for connecting current measurement inputs.
Visual diagrams illustrating various connection configurations.
Explains RS485/RS232 communication and pinouts for standard serial ports.
Lists all configurable parameters within the setup menu.
Configuration for general settings like CT/VT ratios, mode, warnings, and display.
Configuration for serial communication parameters (protocol, baud rate, etc.).
Configuration for the optional load control function.
Configuration for digital output functions like alarms, pulses, and logic.
Configuration for digital input functions like synchronization, periods, and counters.
Options to reset various instrument settings and stored data.
To Next Page
