Contrel EMA90 User Manual

EMA90 - USER MANUAL
-37-
Variable reading average line, three-phase system and neutral current
• (A - kA) rms average three - phase system current [Σ I
av
]
• (A - kA) rms average current L1 [I
1av
]
• (A - kA) rms average current L2 [I
2av
]
• (A - kA) rms average current L3 [I
3av
]
• (A - kA) rms average current N [I
nav
]
Note: The average current is calculated in the average time set in the setup.
The average neutral current will be showed only if the insertion type is 4
wires.
Variable reading maximum average line, three-phase system and
neutral current
• (A - kA) rms maximum average three - phase system current [Σ I
av
]
• (A - kA) rms maximum average current L1 [I
1av
]
• (A - kA) rms maximum average current L2 [I
2av
]
• (A - kA) rms maximum average current L3 [I
3av
]
• (A - kA) rms maximum average current N [I
nav
]
Note: The maximum average current is calculated in the average time set in
the setup. The maximum average neutral current will be showed only if the
insertion type is 4 wires.
Variable reading THD of voltage
• (Thd) total harmonic distortion of voltage L1 phase [Thd
1
]
• (Thd) total harmonic distortion of voltage L2 phase [Thd
2
]
• (Thd) total harmonic distortion of voltage L3 phase [Thd
3
]
Note: At the bottom of the page it’s showed the absolute maximum values
of the three phases.
Variable reading THD of current
• (Thd) total harmonic distortion of current L1 phase [Thd
1
]
• (Thd) total harmonic distortion of current L2 phase [Thd
2
]
• (Thd) total harmonic distortion of current L3 phase [Thd
3
]
Note: At the bottom of the page it’s showed the absolute maximum values
of the three phases.
Variable reading K factor
• k factor L1 phase
• k factor L2 phase
• k factor L3 phase
Note: At the bottom of the page it’s showed the absolute maximum values
of the three phases.

Contrel EMA90 Specifications

General

Brand	Contrel
Model	EMA90
Category	Measuring Instruments
Language	English