7
Choosing Location for the New Thermostat
Thermostat should be mounted:
• Approximately 5 ft (1.5m) from oor.
• Near or in a frequently used room, preferably on an inside partitioning wall.
• On a section of wall without pipes or duct-work.
Thermostat should NOT be mounted:
• Near a window, on an outside wall, or next to a door leading outside.
• With exposure to direct light or heat from a lamp, sun, replace, or other temperature-radiating objects which
may cause false readings.
• Near or in direct airow from supply registers and return-air grills.
• Near concealed pipes and chimneys.
• In areas with poor air circulation, such as behind a door or in an alcove.
After choosing a location for the new thermostat, you must arrange to have a heating contractor install the
control wiring for you.
Installation
TO AVOID FIRE, SHOCK OR DEATH, SHUT OFF POWER
SUPPLY AT THE CIRCUIT BREAKER OR FUSE AND TEST
THAT THE POWER IS OFF BEFORE WIRING.
To Next Page
Loading...