21
COOLING PROGRAM
Slide the system switch to the COOL position and repeat the programming as per the heating program.
TEMPORARY OVERRIDE
To change the temperature temporarily, press UP or DOWN to set the desired temperature. The thermostat will return
to the regular program at the next scheduled program time.
Note: The thermostat has an automatic delay function to protect the heating and cooling systems from undesired on/
off sequences. Sometimes there will be a delay of several minutes before the thermostat will activate the system.
HOLD FUNCTION
• This feature is to hold the thermostat at a constant temperature and disable all set programs until
released.
• Press HOLD once and use UP or DOWN button to set the desired hold temperature. HOLD symbol
will appear to indicate that the Hold function is active.
• To cancel Hold function, press HOLD again. The HOLD symbol will disappear and the thermostat will
return to the programmed temperature.
Programming
To Next Page
Loading...