22
CHECK PROGRAMS
• Press either UP or DOWN once to check the current programmed temperature setting without
changing it.
You may also use the CURRENT key for this function.
ROOM TEMPERATURE
• Current temperature is displayed on the mid-section of the LCD screen.
FAN CONTROL SWITCH
• For automatic control of the fan, set the Fan ON/AUTO switch to the AUTO position. In cooling, the
fan starts/stops with the cooling equipment. In heating, the fan is controlled by the heating
equipment and usually starts a few minutes after the heating equipment turns on.
• To turn on the fan manually, set the Fan ON/AUTO switch to the ON position, the fan will run
continuously to improve air ventilation. To return to automatic control, set the switch to the AUTO
position.
Programming
To Next Page
Loading...