23
HEAT/COOL CONTROL SWITCH
• If this switch is in the OFF position, both the heating and cooling systems are turned off, and all programs and
settings will be disabled.
• Slide the switch to HEAT or COOL to control the heating or air-conditioning system.
• HEAT will display when the switch is in the HEAT position, and will flash when heating is activated.
• COOL will display when the switch is in the COOL position, and will flash when cooling is activated.
PRE-COMFORT RECOVERY
This thermostat is equipped with a (Pre-Comfort Recovery) system that will activate the heating or cooling in advance
of the actual set program time so that the room will be at the desired temperature at the start of the comfort program
time.
It is normal for the system to be activated earlier (up to ½ hour for heating and one hour for cooling) than the actual
set program time.
12/24 HOUR DISPLAY FORMAT (Under the CLOCK Display Mode)
Press both AHEAD and BACK keys together at the same time to change the time display from 12 hour format to 24
hour format (e.g. 8:00pm / 20:00) and vice versa.
Programming
To Next Page
Loading...