Controls 58-E4800 - Troubleshooting

To Next Page

To Previous Page

Manuale di Istruzioni

Instruction Manual

58-E4800 Rev. 4 EN 21/05/2012

5.1 Troubleshooting

The following table provides a list of possible causes and checks in case a faulty

condition is encountered:

Type of fault

Actions

The instrument does not

switch on (display off)



Check the battery charge (inside the instrument)

 Check the power feed line and connectors

 Check the connection of the flat key board cable

 Check the connection of the flat display cable

Transit time not read



Check the correct connection of the probe heads

 Check the quality of the BNC cables

 Distance between probe heads too high

Fig. 5-1

Flat display

Flat keyboard