Controls MVP-62350 - Page 13

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
13
(7)
Module Configuration
Preheat Time
Low Power Mode
Power Save Delay
Pre-Alarms Displayed (Default = 4)
Check Run Criteria
Clear Operation Log (Default = No)
Clear Alarm Log (Default = No)
Clear # of Starts
Engine Run Criteria
Engine Stop Criteria
(8)
Display Configuration
English/Metric Selection
Performance Display Off/On
Fuel Display
(9)
CAN Configuration
Engine Manufacturer
TSC1 Address (Default = 3) Others available
Source Address (Default = 44) Others available
Engine Address (Default = 0) Others available
Speed Transmit On/Off
Temperature Transmit On/Off
Oil Pressure Transmit On/Off
Fuel Level Transmit On/Off
Voltage Transmit On/Off
Hours Transmit On/Off
Faults Transmit
JDLINK Auto Accept
(10)
Maintenance Configuration
Service Messages
Schedule Selection
Schedule Reset
Schedule Interval
Schedule Warning
Schedule Trip
Schedule Message