CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
9
CONTROL PANEL ANALOG AND DIGITAL INPUTS
The panel has three digital input (close to ground) available to monitor other components, senders
or signals. These inputs can be used for a number of purposes including alarms and shut downs.
Digital Function Activation
1) Off / Always / Run – Describes when the parameter will be monitored for alarm conditions.
Run refers to when the engine is running. Off disables the alarm conditions. Always enables
the alarm constantly regardless of engine state.
2) Alarm Delay – The time period, after Sender Check Bypass, that the parameter must be on
the alarm condition before the alarm becomes latched.
CONTROL PANEL OUTPUTS
The panel has three outputs available to signal other devices based on predefined events. These
Outputs can be used for a number of purposes including engine operation or driving an audible
alarm.
To Next Page
Loading...
Need help?
General
