13
GB
IE
Induction Hob by Cooke & Lewis
Getting started...
Caution
This appliance must be wired to a all pole
disconnection switch with protected socket,
which has a 3 mm separation between contacts
and is placed in an easily accessible place next
to the appliance.
• The appliance is connected to an earthed
socket.
Caution
• The cord should not be extended or folded
into coil during operation.
• Adapters, multi-socket strips and
extension leads must not be used.
• Overloading could result in a risk of re.
Caution
The surface of the appliance becomes quite hot
when operating.
This could alter the electrical insulation and could
cause electricity leakage.
> All installation work must be carried out by a competent person or
qualied electrician.
> Before connecting the mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate inside the cooker hood.
> WARNING:THIS APPLIANCE MUST BE EARTHED.
> Mains Supply could be connected to the Mains Voltage by three different
type of installation: Direct Connection
Installation
A110093_CLIND1BK-C_hob_v1_EN_FR_2011_12_29.indb 13 06/01/2012 5:24 PM
To Next Page
Loading...
Need help?
General
