EasyManuals Logo

Cooke & Lewis CLIND1BK-C Installation Manual

Cooke & Lewis CLIND1BK-C
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
GB
IE
Getting started...
Induction Hob by Cooke & Lewis
Installation
Hob Installation
Caution
The ceramic hob must be installed by a
suitably qualied person. Never try to install
the appliance yourself. The ceramic hob must
not be installed above refrigerators, freezers,
dishwashers or tumble dryers. The wall and
the area above the hob should be able to
withstand heat.
> Cut a hole in the worktop of the size shown in the diagram. The worktop
should be at least 30 mm thick and made of a heat-resistant material.
Seal cut edge of the worktop with silicone or PVA.
> Attach the brackets and place the hob into the cut out and push down
rmly.
Installation
01 04
Electrical connection
Warning
Damaged power cords must be replaced by a
competent person or qualied electrician.
Caution
These appliances are classied as Class I.
The earth is obligatory as provided for by law.
The manufacturer declines all liability in the
event that the accident prevention rules have not
been followed.
A110093_CLIND1BK-C_hob_v1_EN_FR_2011_12_29.indb 12 06/01/2012 5:24 PM

Other manuals for Cooke & Lewis CLIND1BK-C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cooke & Lewis CLIND1BK-C and is the answer not in the manual?

Cooke & Lewis CLIND1BK-C Specifications

General IconGeneral
BrandCooke & Lewis
ModelCLIND1BK-C
CategoryHob
LanguageEnglish

Related product manuals