Need help?Do you have a question about the Cooler Master MasterCase Pro 5 and is the answer not in the manual?
Lists the components included in the package and their intended use.
Details the hardware compatibility for the PC case.
Guide on how to install the motherboard into the case.
Instructions for installing the power supply unit.
Steps for installing hard drives into the case.
Further instructions for hard drive installations.
Procedure for installing an optical drive.
Instructions on how to remove the 5.25" drive bay.
Guidance on adjusting the hard drive cage.
Additional adjustments for the hard drive cage.
Steps for mounting fans at the front of the case.
Instructions for installing fans at the top and rear.
Guide for installing a radiator at the front.
Guide for installing a radiator at the top.
Provides further details and contact information.
General| Case Type | Mid Tower |
|---|---|
| Material | Steel, Plastic |
| Motherboard Compatibility | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| 5.25" Drive Bays | 2 |
| I/O Panel | 2x USB 3.0, 2x USB 2.0, Audio In/Out |
| Pre-installed Fans Front | 2 x 140mm |
| Pre-installed Fans Rear | 1x 140mm |
| Maximum CPU Cooler Height | 190mm |
| Weight | 10.5 kg |
| Cooling Support Front | 2 x 120mm / 140mm |
| Cooling Support Top | 2 x 120mm / 140mm |
| Cooling Support Rear | 1 x 120mm / 140mm |
| Cooling Support Bottom | 1 x 120mm |
| Radiator Support Front | 240mm / 280mm |
| Radiator Support Top | 240mm / 280mm |
| Radiator Support Rear | 120mm / 140mm |
| Maximum GPU Length | 412mm |
To Next Page