Setup Menu and Functions
indoors, you can choose “Low”. In outdoor, choose “Middle”in normal
condition. Choose “High”if the environment impact is huge outdoors.
The temperature can also influence the sensor sensitivity. “High
Sensitivity”applies to mild environment. ”Low Sensitivity ”applies to
cold environment.
Options
：【
Low
】
/
【
Middle
】
/
【
High
】
.
Target Recording Time
Set the target recording time. As shown in below picture, you can set
the start and stop time. The camera will work just in the stated time slot.
In other time, the camera will keep in standby state.
Options：【On】/【Off】.
Time Lapse
In Time lapse menu, there are three options as below.
[Normal]: The camera will take pictures automatically as per set time
interval. For example,set the interval time to 1 hour, the camera
will take a photo or video each hour(Confirmation according to
your work mode is taken photo or video). If you want to observe
that a plant blooms, the camera will take 24 photos in 24 hours to
record the whole process of blooming.
[TL Video]: You can set the interval time.The time range is from 1
second to 24 hours. For example, set the interval to 1 hour, the camera
will take a photo each hour. If the camera works for 24 hours,there will
To Next Page
