Setup Menu and Functions
be 24 photos. These photos will be converted into a video.
[Off]: Close the time lapse function.
Note:
1) The camera needs to take multiple pictures to form the playback file.
If the number of pictures taken is too small, the playback file cannot be
formed but is displayed in the form of pictures.
2) When you confirm "On" with the OK button, Time lapse mode
disables the PIR sensor(The camera does not automatically sense
to shot
）
and instead takes photo or records video clip automatically at
your choice of intervals.This has the advantage of scouting further
distances that are out of the PIR sensor's range, such as big open areas
(food plots, fields, etc), or monitoring the flowering, sunrise, and
sunset.
Language
Set the language display on screen.
Options：【English】/【Deutsch】/【Dansk】/【Suomi】/【Svenska】
【español】/【French】/【Italian】/【Nederlands】/【Portuguese】/
【Simplified Chinese】/【Traditional Chinese】/【Japanese】.
Endless Capture
Set the camera to record video in loop, it will loop shooting, the
earliest document will be deleted when the card is nearly full, infinite
To Next Page
