COOLIUS Y10 - Page 25

25COOLIUS Y10
5. Turn COOLIUS SELECT to set
“AUTOMATIC” / “MANUAL” / “NO”
6. If “
AUTOMATIC” is selected:
Turn COOLIUS SELECT to set the Fresh oil value.
Note: The value indicates only the new oil added to the
drained oil.
• Minimum: 0 g.
• Maximum: 150 g.
7. Turn COOLIUS SELECT to set the refrigerant amount.
• Minimum: 50 g.
8. Press ENTER to conrm.
9. Turn COOLIUS SELECT to set (usually HP)
“
HP PORT” / “LP PORT” / “HP/LP PORTS”
10. Press ENTER to conrm.
11. Press START key to conrm.
The equipment performs all the process selected.
Oil/UV charge
Automatic
PAG Oil ml. 10
UV Dye ml. _
Refrigerant
g._____
Charge A/C system by
HP PORT
Confirm by “START”
START in process