3COOLIUS Y10
Contents
1 Important notes on the operating instructions .............................................................................................................. 5
The purpose of this operating manual is:
.....................................................................................................................5
Disclaimer
................................................................................................................................................................................5
1.1 Important information about refrigerant
........................................................................................................................... 6
Safety Classication and information about refrigerant:
.........................................................................................6
1.2 Symbols
......................................................................................................................................................................................7
1.3 Intended use
............................................................................................................................................................................7
2 Important safety instructions
.................................................................................................................................................7
2.1 Glossary of terms
....................................................................................................................................................................7
2.2 General safety rules
...............................................................................................................................................................8
2.3 Guidelines for handling refrigerants
.................................................................................................................................8
2.4 Safety devices
..........................................................................................................................................................................9
2.5 Not condensable gas discharge
........................................................................................................................................9
2.6 Ventilation safety system
......................................................................................................................................................9
2.7 The work environment
...........................................................................................................................................................9
3 Use of the machine
.................................................................................................................................................................. 10
3.1 Unpacking and checking the components
.................................................................................................................. 10
3.2 Machine description
............................................................................................................................................................. 10
3.2.1 Control panel
.................................................................................................................................................................. 10
3.2.2 The machine
....................................................................................................................................................................11
3.2.3 Transport lock
................................................................................................................................................................. 12
3.3 Machine handling
................................................................................................................................................................. 12
3.4 On/O and stopping
............................................................................................................................................................ 12
4 Preparation for the use and settings
............................................................................................................................... 13
4.1 Switch on the machine
....................................................................................................................................................... 13
Switch on the machine for the rst time
..................................................................................................................... 13
4.2 Using the printer
.................................................................................................................................................................... 14
Unlocking the machine
..................................................................................................................................................... 14
4.3 Download the service report
............................................................................................................................................ 15
4.4 Program selection
................................................................................................................................................................ 17
Overview of the menu contents
.................................................................................................................................... 17
4.5 Setting
....................................................................................................................................................................................... 18
4.5.1 Machine set-up
.............................................................................................................................................................. 18
4.5.2 Time-Date
....................................................................................................................................................................... 19
4.5.3 Company data
................................................................................................................................................................ 20
4.6 Maintenance messages
..................................................................................................................................................... 20
4.7 Error messages
..................................................................................................................................................................... 21
4.8 Vessel charge
........................................................................................................................................................................ 21
5 Programs
...................................................................................................................................................................................... 23
5.1 New oil bottle change
........................................................................................................................................................ 23
5.2 Fast service
............................................................................................................................................................................ 24
Recovery
............................................................................................................................................................................... 24
Vacuum / A/C system charge
......................................................................................................................................... 24
5.3 Full service
.............................................................................................................................................................................. 26
5.4 A/C database
........................................................................................................................................................................ 27
5.5 Owner Database
................................................................................................................................................................... 28
5.5.1 Creation of a vehicle
.................................................................................................................................................... 28