Need help?Do you have a question about the Cooper Security Scantronic 9751 and is the answer not in the manual?
General| Brand | Cooper Security |
|---|---|
| Model | Scantronic 9751 |
| Category | Control Unit |
| Language | English |
Details the purpose and scope of the update guide for version 5.0x software.
Allows leading '0' in access codes, including user and installer codes, for improved flexibility.
Describes changes to entering and leaving installer mode, including new exit confirmation checks.
Details faults now active for Option 38, including AC Fail, Jamming, and Zone Faults, expanding fault reporting.
Explains that option 0 disables telephone line monitoring for the internal communicator, affecting fault reporting.
New command to enable/disable alert tones and display alert messages for faults, improving user feedback.
Details plug-by communicator outputs and their active faults, including AC Fail and Battery Missing, for advanced configuration.
Lists new log messages in version 5.0x for the 9853 model, such as AC Alert and Zone Lock Out status.
End users can now use '0' as the first digit and correct mistakes by re-keying, simplifying code entry.
Enables end users to control access for incoming calls from Downloader using access codes, enhancing remote management.
To Next Page
