Need help?Do you have a question about the Cooper Security Scantronic 9752 and is the answer not in the manual?
General| Brand | Cooper Security |
|---|---|
| Model | Scantronic 9752 |
| Category | Control Unit |
| Language | English |
Explains the manual's structure and purpose.
Lists key features and capabilities of the 9752 control unit.
Describes the components that make up an Intruder Alarm System.
Details 9930/9940 keypads, ScanProx reader, and system expanders.
Explains partitioned vs. single systems and user access code management.
Provides detailed general, environmental, and power specifications for the control unit.
Details the unit's outputs, inputs, and the types of fuses used.
Lists all compatible components and software for the 9752 system.
Illustrates the control unit's PCB layout and identifies key connectors.
Outlines the typical installation process and site preparation steps.
Details recommended cable types and wiring configurations for keypads and expanders.
Instructions for physically mounting and securing the control unit enclosure.
Guides on installing 9940 and 9930 keypads, including backplate mounting and tamper switch operation.
Instructions for attaching the proximity reader module to keypads.
Covers cable entries and mains power connection for the control unit.
Explains how to connect keypads and external/internal sounders.
Details wiring methods for detector circuits to the main PCB (CCL/FSL).
Details the process of connecting both hardwired and radio expanders.
Describes how to program outputs and connect a keyswitch interface.
Covers connecting the internal communicator, telephone line, and line monitoring features.
Instructions for fitting a plug-by communicator and a standby battery.
Guides through the initial power-up sequence, default codes, and entering installer mode.
To Next Page
