Cooper Security Scantronic 9752 User Manual

497098 Issue 3 Page 1
1. INTRODUCTION
About this Manual
This manual is divided into three chapters:
1. Introduction: this describes the parts of an Intruder Alarm System (IAS)
based on the 9752 control unit.
2. Technical description: this defines the operating parameters of the different
parts of the system.
3. Installation: this explains the tasks involved in installing an IAS using the
9752 control unit.
The control unit is designed to be fully programmable to suit individual user
and site requirements. Installers can program units either from a keypad or
using a program called Downloader on a PC running Windows (Windows 98
2nd Edition or later). When programming from a keypad, instructions are
entered using the three-digit commands described in the Programming Guide.

Cooper Security Scantronic 9752 Specifications

General

Brand	Cooper Security
Model	Scantronic 9752
Category	Control Unit
Language	English