Copley Controls Xenus XSL-230-18 - 4: Regen Resistor Configuration with CME 2

Xenus Regeneration Guide Regen Resistor Sizing and Configuration
Copley Controls Corp. 7
1.3.4: Regen Resistor Configuration with CME 2
1.3.4.1 Click Configure Regen ( ) to open the Regen Resistor screen.
1.3.4.2 Select a resistor option.
Option Description
None No external regen resistor is used.
XSL-RA-01
XSL-RA-02
Standard regen resistors supplied by Copley Controls.
Custom Resistor User-supplied resistor. See Regen Resistor Sizing and Configuration (p. 9).
1.3.4.3 Click OK to save regen settings to flash memory and close the Regen Resistor screen
OR
click Cancel to restore to previous values and close the screen.