About this Guide Xenus Regeneration Guide
iv Copley Controls Corp.
Product Warnings
Observe all relevant state, regional, and local safety regulations when installing and using this
product. For safety and to assure compliance with documented system data, only Copley Controls
Corporation should perform repairs to amplifiers.
DANGER: Hazardous voltages.
!
DANGER
Exercise caution when installing and adjusting.
Failure to heed this warning can cause equipment damage, injury, or death.
Risk of electric shock.
!
DANGER
High-voltage circuits on J1, J2, and J3 are connected to mains power.
Failure to heed this warning can cause equipment damage, injury, or death.
Use equipment as described.
!
DANGER
Operate amplifiers within the specifications provided in this manual.
Failure to heed this warning can cause equipment damage, injury, or death.
Revision History
Release Date Applies to Comments
1.0 July 2003 Xenus firmware version 2.16
CME 2 Software version 3.1
Initial publication.
1.1 November 2004 Xenus firmware version 4.0.
CME 2 Software version 4.0.
Corrected model number in specifications table
(p. 2).
To Next Page
Loading...
