⚫ Please adjust the leveling to prevent to affect the dyeing result while
installing the machine.
⚫ The over temperature protection function has been designed. The default
setting is 150 °C for this temperature controller.
⚫ Maximum gradient 4 °C/min is allowed for the dyeing program.
⚫ If display unknown code on the screen during operation, please turn off
the power for 10 second and then turn on again.
⚫ While machine running，if the motor isn’t running, please turn off the
power，after 10 second, then turn on the power again.
⚫ After the dyeing program is completed, please don’t open the beaker lid
directly. As we know, it will create pressure inside the beaker while rising
temperature. For security reason, operator must cool the beaker before
open the lid, to avoid danger by the high temperature pressure.
⚫ If you want to open the door while dyeing program is on processing,
please keep far away from the high temperature rotary reel.
⚫ The rotary reel will slow down the speed while the front door is open.
⚫ If the alarm is not off within 2 minutes, please turn off the machine and
cool it, then restart the program again. If the situation persists, please
contact the service technician.
To Next Page
Loading...
Need help?
General