- 21 -!
remains so until the boat leaves the trailer.!
It then becomes the responsibility of the crane!
company and remains so until the boat touches!
the ground.!
We, therefore, recommend that you make sure!
that your carrier and crane company are well!
insured and that your own policy becomes!
effective the moment the final payment is made!
SAFETY!
EXITS
Before you start working on the boat, make!
sure that there are two possible exits, one at each!
end of the boat. This, evidently, is in case of a!
fire.!
EXTINGUISHERS
Be sure to install a 10 lbs. type A.B.C.!
extinguisher near each exit.!
VENTILATION
Before proceeding with any fibreglass!
lamination, ensure proper ventilation. The purpose!
is twofold: first, it accelerates the catalyzation!
process and, secondly, for obvious health reasons.!
The styrene (the strong smell of fibreglass)!
should be blown away from the person doing the!
work. We, therefore, recommend the installation of!
a large hatch on the front of the deck, or at!
least a temporary hatch. A large flat house fan!
can then be installed over the hatch. This will!
!
To Next Page
Loading...