- 58 -!
must be waterproof before you pour the liquid foam!
since it will enter any small cracks and expand behind!
them. It is also recommended that the interior of the!
compartment be lined with aluminum foil, with the!
bright side facing towards the interior. Access to the!
refrigerator should be as small as possible in order to!
allow the smallest loss of cold air when the unit is!
opened.!
d) LIGHTING!
To minimize the amount of wiring in the boat, we!
recommend a complete 12-volt system only. Fluorescent!
lights are very efficient and consume very little!
electricity. All fluorescent fixtures should be of the!
same size to minimize the number of spare tubes required.!
It is very easy to install fluorescent fixtures at this!
stage, they will be appreciated when required. We suggest!
you install a couple in the engine room, the pilothouse,!
under the cupboards in the galley area, in the cockpit!
lockers above the refrigerator and dinette area and also!
in the head and the forward stateroom.!
To Next Page
Loading...